background image

- 2 - 

P0001  COMBUSTIBLE - CONTROL DE VOLUMEN - CIRCUITO ABIERTO 
P0002  COMBUSTIBLE -CONTROL DE VOLUMEN - ÁREA / CIRCUITO DE FALLO 
P0003  CONTROL DE VOLUMEN DE COMBUSTIBLE - Señal demasiado baja 
P0004  CONTROL DE VOLUMEN DE COMBUSTIBLE - señal demasiado alta 
P0005  CORTE DE COMBUSTIBLE ELECTROVÁLVULA - CIRCUITO ABIERTO 
P0006  CORTE DE COMBUSTIBLE ELECTROVÁLVULA - Señal demasiado baja 
P0007  CORTE DE COMBUSTIBLE ELECTROVÁLVULA - Señal demasiado alta. 
P0008  MOTOR DE TIEMPOS DE CONTROL DE LA SERIE DEL CILINDRO 1 - 
RENDIMIENTO DEL MOTOR 
P0009  MOTOR DE TIEMPOS DE CONTROL DE LA SERIE DEL CILINDRO 2 - 
RENDIMIENTO DEL MOTOR 
P0010  EJE DE POSICIÓN, LATERAL / IZQUIERDA / FRONT, SERIE DEL CILINDRO 1 - mal 
funcionamiento del circuito 
P0011  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL / IZQUIERDA / FRONT, 
SERIE DEL CILINDRO 1 - AJUSTE DE LA EXCESIVA EN DIRECCIÓN PRECOZ / NO. 
P0012  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL / IZQUIERDA / FRONT, 
SERIE DEL CILINDRO 1 - AJUSTE EN EXCESO DE SEMILLA DE DIRECCIÓN / NO. 
P0013  EJE DE POSICIÓN, LATERAL, POSTERIOR DERECHA DEL CILINDRO DE LA 
SERIE 1 - mal funcionamiento del circuito 1 
P0014  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL, POSTERIOR DERECHA 
DE LA SERIE DEL CILINDRO 1 - AJUSTE DE LA EXCESIVA EN DIRECCIÓN PRECOZ / NO 
P0015  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL, POSTERIOR DERECHA 
DE LA SERIE DEL CILINDRO 1 - AJUSTE EN EXCESO DE SEMILLA DE DIRECCIÓN / NO 
P0016  POSICIÓN DEL CIGÜEÑAL / árbol de levas. Banco 1 sensor A - ERROR DE 
REFERENCIA 
P0017  POSICIÓN DEL CIGÜEÑAL / árbol de levas. Banco 1 sensor B - ERROR DE 
REFERENCIA 
P0018  POSICIÓN DEL CIGÜEÑAL / árbol de levas. Banco 2 sensor A - ERROR DE 
REFERENCIA 
P0019  POSICIÓN DEL CIGÜEÑAL / árbol de levas. Banco 1 sensor B - ERROR DE 
REFERENCIA 
P0020  EJE DE POSICIÓN, ENTRADA LATERAL / IZQUIERDA / FRONT, CILINDRO DE LA 
SERIE 2 - un mal funcionamiento del circuito 
P0021  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL / IZQUIERDA / FRONT, 
SERIE DEL CILINDRO 2 - AJUSTE DE LA EXCESIVA EN DIRECCIÓN PRECOZ / NO 
P0022  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL / IZQUIERDA / FRONT, 
SERIE DEL CILINDRO 2 - AJUSTE EN EXCESO EN LA SEMILLA DE  DIRECCIÓN PRECOZ 
/ NO 
P0023  EJE DE POSICIÓN, LATERAL, POSTERIOR DERECHA DEL CILINDRO DE LA 
SERIE 2 - mal funcionamiento del circuito 1 
P0024  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL, POSTERIOR DERECHA 
DE LA SERIE DEL CILINDRO 2 - AJUSTE DE LA EXCESIVA EN DIRECCIÓN PRECOZ / NO 
P0025  POSICIÓN DEL ÁRBOL DE LEVAS, ENTRADA LATERAL, POSTERIOR DERECHA 
DE LA SERIE DEL CILINDRO 2 - AJUSTE EN EXCESO DE LA SEMILLA DE DIRECCIÓN 
PRECOZ / NO 
P0026  CIRCUITO DE SOLENOIDE válvula de admisión del árbol de levas de ajuste, 
CILINDRO DE SERIE 1 - Alcance 
P0027  CIRCUITO DE ELECTROVÁLVULA ESCAPE DE AJUSTE DEL ÁRBOL DE LEVAS, 
SERIE DEL CILINDRO 1 - Gama 
P0028  CIRCUITO DE SOLENOIDE válvula de admisión del árbol de levas de ajuste, 
CILINDRO DE SERIE 2 - Alcance 
P0029  CIRCUITO DE ELECTROVÁLVULA ESCAPE DE AJUSTE DEL ÁRBOL DE LEVAS, 
SERIE DEL CILINDRO 2 - Gama 

Summary of Contents for 63310








































Reviews: