BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
4
Mounting the gooseneck
Slide the guide pin of the gooseneck into the groove in the plug and fasten the gooseneck at the device.
Using the Borescope
1. To switch the Borescope on, use the „On / Off“ button. The Power LED will light up and shows that the
unit is functional. The LCD display displays the camera image. To switch the Borescope off, use the
On / Off button. The Power LED will be switched off and the LCD display will also be switched off.
2. Set the image brightness to the desired level by pressing the „LCD Brightness“ button. The brightness
level 0 to 30 is shown in the display. Each time the "LCD Brightness" button is pressed, the brightness
is set one step higher and then jumped to the lowest brightness level 0 after the highest brightness
level 30 is reached, etc.
3. Set the desired brightness of the camera illumination by pressing the "LED Brightness" button. The
brightness of the LED camera illumination is adjustable in 6 steps.
4. The "Color / Black-White" button can be used to switch between color or black-white display.
5. Place the flexible gooseneck into the area to be examined. Make sure that the gooseneck is always
easy to manoeuvre. You can move the gooseneck in every conceivable direction, making it possible
to examine areas that would otherwise be difficult to access.
Maintenance / Care / Service
Clean the device with a dry cloth.
Do not use solvents or other aggressive detergents under any circumstances.
WarnIng! Leave the repair of the device to qualified technical personnel to repair. Thus the safety of the
device is guaranteed and maintained.
WarnIng! Leave the exchange of the plug or the connecting cable always to qualified technical personnel.
Thus the security of the equipment is guaranteed and maintained.
This product complies with the RoHS Directive 2011/65/EU
RoHS
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment.
Disposal
Do not dispose battery in household waste.
Batteries should be disposed of in a responsible manner,
they must be disposed at appropriate collection point.
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment. When the product is no longer required, it must
be disposed of in an environmentally protective way. Contact your local solid waste
authority for recycling information or give the product for disposal to BGS technic or to the
dealer where you purchased the product.
