BGH BMPE36CTL Manual Download Page 6

6

DISPOSAL: Do not dispose this product as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection 
facilities.
Contact you local government for information regarding the collection systemsavailable.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak 
into the groundwater and get into the food chain, damaging your health and well-being.

The unit must be permanently grounded. Failure to do so can result in electrical shock causing 
personal injury or death.

PROPOSITION 65: This appliance contains fiberglass insulation. Respirable particles of 
fiberglass are known to State of California to cause cancer.
All manufacturer products meet current federal OSHA Guidelines for safety.
California Proposition 65 warnings are required for certain products, which are not covered by 
the OSHA standards.
California’s Proposition 65 requires warnings for products sold in California that contain or 
produce any of over 600 listed chemicals known to the State of California to cause cancer 
or birth defects such as fiberglass insulation, lead in brass, and combustion products from 
natural gas.
All “new equipment” shipped for sale in California will have labels stating that the product 
contains and /or produces Proposition 65 chemicals. Althoughwe have not changed our 
processes, having the same label on all ourproductd facilitates manufacturing and shipping. 
We cannot always know“when, or if” products will be sold in the California market.
You may receive inquiries from customers about chemicals found in, or produced by, some 
of our heating and air-conditioning equipment, or found in natural gas used with some of our 
products. Listed below are those chemicals and substances commonly associated with similar 
equipment in our industry and other manufacturers.

Summary of Contents for BMPE36CTL

































Reviews: