12
Epic-PPG-manual-EN-1-2
June 2019
completely, keeping your hands up.
To reduce fuel consumption or to fly in thermals, the trimmers should be closed, pulled down to their maximum.
It is important to regularly check the wear on the trimmers and that the system is functioning cleanly with no sticking
points. If they are showing signs of wear, the trimmers should be replaced by the pilot.
You should never fly a paramotor in strong turbulence or violent winds.
Turning
The first turns should be gradual and progressive. The first action to change direction should be the movement of your
weight in the harness towards the side of the intended turn. Then gently relax the pressure on the outer brake, and
gently apply pressure to the inner brake until you attain the desired bank angle. To adjust your speed and turning-circle
size, coordinate your weightshift with pressure on the outer brake.
Remember that to violently apply pressure on the brakes is dangerous and should be avoided. Never initiate a turn if
you are flying slowly, as you risk the glider entering a spin.
Landing
Set the trimmers to the closed position and set up your approach downwind of the landing field. When your height
above the field is around 40m, switch the engine off* and make your final approach, keeping your hands up to keep
plenty of energy in the wing until you are about a metre above the ground. Flare, braking slowly and gradually to
slow down the wing until you are close to the stall-point and able to land on your feet.
*If you land with the engine running there is a considerable risk of rotational propeller damage, (lines passing through
the propeller, or even injury)
4. Flight Characteristics
