© BG Corp 2005
12
Mounting the loudspeakers
Mounting Procedures
The R-18i and R-17i loudspeakers are designed
to be mounted on the wall. The packaging box
contains a mounting kit consisting of:
- White cardboard mounting template
- Metal mounting bracket
- Drywall screws with plastic anchors.
1. Determine your exact loudspeaker location by
studying the diagram on page 7 and considering
other aspects of your room and listening
conditions.
2. Using a measuring tape and level, position
enclosed cardboard template according to the
loudspeaker model and mounting orientation.
Left and right main and rear loudspeakers
must be mounted vertically. The center channel
loudspeaker should be mounted horizontally
unless you can mount it behind a perforated
screen in vertical position. Position the
template with TOP OF THE SPEAKER mark
appropriately.
3. Mark positions of the four mounting holes using
holes in the template.
4. Drill pilot holes in the wall using 1/8” drill bit.
5. Install the four plastic anchors in the wall in
marked points.
6. Install the metal bracket using enclosed
screws.
7. Connect the speaker wire to the loudspeaker making sure the positive wire
goes to the red binding post and the negative wire goes to the black binding
post.
