7
III. Product Rating, Specifications, and Dimensional Data
BFIT Water Heaters are condensing, high-efficiency, gas-
fired appliances designed for use in direct domestic hot
water heating systems where supply water temperature
does not exceed 190°F. These water heaters have special
coil type stainless steel heat exchangers, constructed,
tested and stamped per Section IV of the ASME Boiler and
Pressure Vessel Code, which provide maximum heat trans
-
fer and simultaneous protection against flue gas product
corrosion. These water heaters are
not
designed for use in
space heating systems or swimming pool heating systems.
Information specific to the Dual Gas model can be found
in the appendices.
Table 1: BFIT Water Heater Ratings
Table 2: BFIT Water Heater Specifications
Specification
BFITW Models
1000
1250
1500
2000
Fuel
NG or LP NG or LP NG or LP NG or LP
Max. Water Temp. (°F)
1
210
210
210
210
Max. Working Pres. (psi)
160
160
160
160
Standard Safety Relief
Valve (psi)
150
150
150
150
Water Vol. (gal)
12
12
13.9
17.2
Heat Transfer Area (sq. ft.)
100
100
120
153
Approx. Shipping Weight (lb)
922
922
1217
1217
1
Appliance will go into hard lockout if temperature exceeds 200
0
F.
BFIT Water
Heater Model
Input (MBH)
Gross
Output
(MBH)
Recovery Rate
(GPH)
Combustion
Efficiency
(%)
Min.
Max.
Thermal Efficiency
(%)
1000
200
1000
980
1188
98
97
1250
250
1250
1225
1485
98
97
1500
300
1500
1470
1782
98
97
2000
400
2000
1960
2376
98
96.9
1
Ratings shown are for installations at sea level and elevations up to 2000 ft. at minimum vent length.
For high altitude installations above 2000 ft. consult factory.
