13
WALKING BELT CENTERING
The walking belt may occasionally need to be centered. First be certain that the belt is
tensioned properly. Start the treadmill and run it at about 6km/h. Place the allen key
through the hole in the left rear end cap and into the socket of the adjustment screw. (See
picture below)
1.
If belt has moved too far to the left:
Turn the left adjustment screw 1/4 turn clockwise (tight) or turn the right adjustment
screw 1/4 turn anticlockwise (loose). Take off the rear end caps and make sure
both sides of the rear roller are parallel.
2.
If belt has moved too far to the right:
Turn the left adjustment screw 1/4 turn anticlockwise (loose) or turn the right
adjustment screw 1/4 turn clockwise (tight). Take off the rear end caps and make
sure both sides of the rear roller are parallel.
Continue to run the treadmill around 3-5 minutes to ensure the belt has been centered.
Make sure the belt is not too loose to be slippery and you have not made an
over-adjustment.
