Quick Setup
10
4.
Quick Setup
This chapter guides you through the basic set up of the DP-P1 so that
you can experience its basic feature. In order to enjoy the DP-P1 fully,
please refer to Chapter 8. Advanced Setup.
1. Start Quick Setup
If A/V and antenna connection is complete, press the
STANDBY
button
to start. The front display window will show “Welcome”, “Loading” and
“Start” successively.
If you turn on the DP-P1 for the first time after purchasing, there will be
no digital broadcasting services stored in the DP-P1, it will switch to
SETUP MENU automatically by showing “Service Scan” on the front
display window. Otherwise, you can enter SETUP MENU by pressing the
SETUP
button.
If there is a list of the digital broadcasting services stored in the DP-P1,
the front display window will display the service name such as “TEN
Digital” when it is ready to use.
NOTE
z
If the front display shows “Service Scan”, you have to scan the
broadcasting services first. Please refer to the next section of
scanning services.
1-1. Quick Setup of Video Output Format
If the front display window indicates that the DP-P1 is ready to use but
nothing displays on the TV screen, you have to adjust the format and
resolution of the video output by pressing the
TV-OUT
button. The
default video output is in a SD PAL (576i) format. You can switch the
video output to a SD NTSC (480i), HD PAL (720p), HD NTSC (720p),
HDMI PAL (1080i), HDMI NTSC (1080i), PAL HDMI Auto, NTSC HDMI
Auto, HDMI PAL (576p) and HDMI NTSC (480p) format successfully with
the
TV-OUT
button. Please refer to the following information to adjust
the video output to each of the video connection types.
z
Composite/S-VHS: SD PAL or SD NTSC
z
Component: HD PAL or HD NTSC
z
HDMI: PAL HDMI Auto, NTSC HDMI Auto, HDMI PAL or HDMI NTSC
NOTE
z
The
TV-OUT
button is developed so that you can configure the video
output of the DP-P1 when you can not see anything on the TV screen
because the video formats do not match each other.
z
Most TV sets support the PAL format in Australia..
z
The front display window indicates the current video format as you
press the
TV-OUT
button.
z
Please allow 3 seconds after pressing the
TV-OUT
button for the
configuration change to become effective.
z
It is strongly recommended that you again configure the video format
more precisely in the Setup menu.