User Manual for Wireless VoIP Phone
- 39 -
Version1.0 2007-12-29
When the handset 1 holder is in talking mode, if you’d like to invite handset 2 holder to join, you can
press
button on handset 1, and press 2 to call handset 2 holder. When the handset 2 is ringing,
press
button and handset 1 holder press
button to activate the intercom function.
Press
button on any involved handset to exit the conversation
MAINTENANCE
※
Keep dry
: Do not put this phone near a bathtub, wet basement or anywhere near water.
※
Do not open unit
: Do not take this phone apart. If repair work is required take it to a qualified service
representative.
※
Away form electrical equipment
: Place the unit over 2 feet away form electrical equipment.
※
Avoid high temperature
: Do not put the unit under sun shining or near high temperature
environment.
※
Careful clearing
: Do not clean the unit using chemic liquor.
※
No shocking
: Do not put the unit on an unstable place; do not shock the unit.
※
Press the button properly
: Press keypad properly to ensure normal operation of the phone.
※
Battery replacement
: Replace the battery if the power is poor; take out the battery if the unit is not
worked long time.
TROUBLE SHOOTING
Q1: Why there is no incoming call display on LCD?
※
Check if the battery is installed correctly and if power is full.
※
Check if the phone connection is in a normal status.
Q2: The LCD display effect is not so good. How to solve it?
※
Check if the battery is installed correctly and if the power is full.
※
Adjust the LCD contrast again.
Q3: Why there is no dial tone or rings?
※
Check the line connection
※
Check if the non-disturb function is activated
