Select your antenna
Options:
Rod Antenna (CA Q 11)
Omni (CA Q 14)
Planar (CA Q 13)
Select your cable length
*
*This menu option will be skipped, when the “Rod
Antenna (CA Q 11)” has been selected under “Select
your antenna”.
Options:
10m / 33ft (CA Q 31)
20m / 66ft (CA Q 32)
Warning before completing the settings
“Cancel” = To start the entry process again
“Confirm data entries” = To confirm all entries
Display after having completed all entries
When you turn on the control unit for the first time a
message will be displayed about selecting the appropriate
options with the volume control (turn to select the option;
press to confirm the selection).
Example for settings for initial operation
Select your location
Options:
Europe
USA / Canada*
Japan*
China
Australia
India*
Russia
Korea
Other
*No options available for antennae and antenna cables
•
Turn on the Quinta CU control unit with the On/Off switch
.
•
When you turn on the control unit for the
first
time, you have
to enter the following settings:
– Region
– Antenna*
– Antenna Cable*
* not for USA/Canada, Japan, India
•
By turning the volume control
you can select an option.
•
By pressing the volume control
you confirm your selected
option and store it permanently.
•
Please note that
after
the
last confirmation
of all settings
no
further changes can be made!
•
In the following you will find an example for the first set-up.
Quinta CU Control Unit – Initial Operation
beyerdynamic GmbH & Co. KG | Theresienstr. 8 | 74072 Heilbronn – Germany | Tel. +49 (0)7131 / 617-400 | [email protected] | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com
E2/PI Quinta Initial ( 09.12)/634.964/ • Non-contractual illustrations. Contents subject to change without notice.
Caution:
Please make sure that you select the
correct
region.
Should you select
USA/Canada
or
Japan
although the Quinta system is
not
in this region,
you
cannot
reset this entry. In this case you must
return the unit to beyerdynamic.
