Orbis SU 63
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
[email protected] | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis SU 63 (01.15)
4 of 5
C
ONNECTIONS
RJ 45 sockets
The Orbis SU 63 system unit is connected to the Orbis CU control
unit via the RJ45 sockets. Furthermore, the RJ45 sockets are used to
connect the Orbis SU 63 system units with one another or other
Orbis MU microphone units.
Phoenix
®
connectors
5-pin connector, contact spacing 3.5 mm
You can connect a headphone or loudspeaker to the 5-pin
Phoenix
®
connector of the Orbis SU 63 system unit.
Headphone R and Headphone L:
connectors for a headphone
Ground:
ground
Speaker - and S:
connectors for a loudspeaker
2 x 7-pin connector, contact spacing 3.5 mm
You can connect a gooseneck microphone, a microphone button
and external LEDs to the 7-pin Phoenix
®
connector.
Mic Input:
to connect a microphone
Ground:
ground
Mic Button:
to connect a microphone button
Mic LED Green:
to connect an external LED, which displays an
active microphone
Mic LED Red:
to connect an external LED, which displays an
entered request-to-speak and not yet released microphone
Speak LED:
to connect an external LED, which displays the ready-
to-speak status of the microphone
LED-Power:
power source for the external LED
You can connect external LEDs and individual buttons to the other
7-pin Phoenix
®
connector.
Function LED:
to connect an external LED, which displays the
function mode of a chairman microphone unit
Function:
to connect a button for prior turning on of a switched off
chairman microphone unit, while muting the delegate microphones
temporarily
Clear:
to connect a button to turn on the chairman microphone
unit while turning off the switched on or registered delegate
microphones. Depending on the the operating mode the requests to
speak are cleared or not
Ground:
ground
Volume Up and Volume Down:
to connect buttons to adjust the
volume of a connected headphone
Channel:
to connect a button to select a channel (original or 1 AUX-
IN e.g foreign language)
W
IRING
D
IAGRAM
– C
ONNECTIONS
Example:
5-pin XLR socket
