A
RCHITECT
’
S
S
PECIFICATIONS
The cardioid electret condenser boundary microphone shall be a
high-quality installation microphone for tabletops or ceilings. The
microphone shall be provided with an integrated amplifier and
power supply. The SCUDIO
®
technology shall eliminate inter-
ferences of other wireless communication devices. The microphone
shall be powered by phantom power between 8 V and 52 V. The
filter in the microphone grille shall eliminate wind and pop noise.
The fully metal housing shall provide a M20 x 1.5 thread with
fastening nut and black metal microphone grille. The delivery shall
include elastic bearing rings to compensate mechanical noise and
vibration. The frequency response shall be 50 Hz - 18 kHz. The open
circuit voltage shall be 19 mV/Pa. The nominal impedance shall be
200 ohms. The lower part of the housing shall provide a 3-pin male
XLR connector. The total length shall be 76 mm [3"], the shaft
length shall be 67 mm [2.6"], the shaft diameter shall be 20 mm
[0.8"] (M20 x 1.5 thread with fastening nut), the head diameter
shall be 30 mm [1.2"], the length of the head shall be 9 mm [0.4"].
The net weight shall be 0.085 kg [0.2 lbs].
Manufacturer:
beyerdynamic
Type:
Classis BM 32 B
The cardioid electret condenser boundary microphone shall be a
high-quality installation microphone for tabletops or ceilings. The
microphone shall be provided with an integrated amplifier and
power supply. The SCUDIO
®
technology shall eliminate inter-
ferences of other wireless communication devices. The microphone
shall be powered by phantom power between 8 V and 52 V. The
filter in the microphone grille shall eliminate wind and pop noise.
The fully metal housing shall provide a M20 x 1.5 thread with
fastening nut and a microphone grille with silver metal-look made
of double-layer, fine-meshed acuraLINE
®
wire mesh. The delivery
shall include elastic bearing rings to compensate mechanical noise
and vibration. The frequency response shall be 50 Hz - 18 kHz. The
open circuit voltage shall be 19 mV/Pa. The nominal impedance
shall be 200 ohms. The lower part of the housing shall provide a
3-pin male XLR connector. The total length shall be 76 mm [3"],
the shaft length shall be 67 mm [2.6"], the shaft diameter shall be
20 mm [0.8"] (M20 x 1.5 thread with fastening nut), the head
diameter shall be 30 mm [1.2"], the length of the head shall be
9 mm [0.4"]. The net weight shall be 0.085 kg [0.2 lbs].
Manufacturer:
beyerdynamic
Type:
Classis BM 32 SE
The cardioid electret condenser boundary microphone shall be a
high-quality installation microphone for tabletops or ceilings. The
microphone shall be provided with an integrated amplifier and
power supply. The SCUDIO
®
technology shall eliminate inter-
ferences of other wireless communication devices. The microphone
shall be powered by phantom power between 8 V and 52 V. The
filter in the microphone grille shall eliminate wind and pop noise.
The fully metal housing shall provide a M20 x 1.5 thread with
fastening nut and white metal microphone grille. The delivery shall
include elastic bearing rings to compensate mechanical noise and
vibration. The frequency response shall be 50 Hz - 18 kHz. The open
circuit voltage shall be 19 mV/Pa. The nominal impedance shall be
200 ohms. The lower part of the housing shall provide a 3-pin male
XLR connector. The total length shall be 76 mm [3"], the shaft
length shall be 67 mm [2.6"], the shaft diameter shall be 20 mm
[0.8"] (M20 x 1.5 thread with fastening nut), the head diameter
shall be 30 mm [1.2"], the length of the head shall be 9 mm [0.4"].
The net weight shall be 0.085 kg [0.2 lbs].
Manufacturer:
beyerdynamic
Type:
Classis BM 32 W
The omnidirectional electret condenser boundary microphone shall
be a high-quality installation microphone for tabletops or ceilings.
The microphone shall be provided with an integrated amplifier and
power supply. The SCUDIO
®
technology shall eliminate inter-
ferences of other wireless communication devices. The microphone
shall be powered by phantom power between 8 V and 52 V. The
filter in the microphone grille shall eliminate wind and pop noise.
The fully metal housing shall provide a M20 x 1.5 thread with
fastening nut and black metal microphone grille. The delivery shall
include elastic bearing rings to compensate mechanical noise and
vibration. The frequency response shall be 50 Hz - 18 kHz. The open
circuit voltage shall be 15 mV/Pa. The nominal impedance shall be
200 ohms. The lower part of the housing shall provide a 3-pin male
XLR connector. The total length shall be 76 mm [3"], the shaft
length shall be 67 mm [2.6"], the shaft diameter shall be 20 mm
[0.8"] (M20 x 1.5 thread with fastening nut), the head diameter
shall be 30 mm [1.2"], the length of the head shall be 9 mm [0.4"].
The net weight shall be 0.085 kg [0.2 lbs].
Manufacturer:
beyerdynamic
Type:
Classis BM 33 B
The omnidirectional electret condenser boundary microphone shall
be a high-quality installation microphone for tabletops or ceilings.
The microphone shall be provided with an integrated amplifier and
power supply. The SCUDIO
®
technology shall eliminate inter-
ferences of other wireless communication devices. The microphone
shall be powered by phantom power between 8 V and 52 V. The
filter in the microphone grille shall eliminate wind and pop noise.
The fully metal housing shall provide a M20 x 1.5 thread with
fastening nut and a microphone grille with silver metal-look made
of double-layer, fine-meshed acuraLINE
®
wire mesh. The delivery
shall include elastic bearing rings to compensate mechanical noise
and vibration. The frequency response shall be 50 Hz - 18 kHz. The
open circuit voltage shall be 15 mV/Pa. The nominal impedance
shall be 200 ohms. The lower part of the housing shall provide a
3-pin male XLR connector. The total length shall be 76 mm [3"],
the shaft length shall be 67 mm [2.6"], the shaft diameter shall be
20 mm [0.8"] (M20 x 1.5 thread with fastening nut), the head
diameter shall be 30 mm [1.2"], the length of the head shall be
9 mm [0.4"]. The net weight shall be 0.085 kg [0.2 lbs].
Manufacturer:
beyerdynamic
Type:
Classis BM 33 SE
Classis BM 32 / 33 / 34
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
[email protected] | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E5 / BM 32/33/34 (08.12)
5 of 6
