CA 4146 – Examples
21
english
Additional power supply units when the microphone units are set up in a loop
With redundancy i.e. powering the microphone stations on both sides, any cable of the loop can be removed during operation without
interrupting the meeting. All microphone stations are then powered on one side. In this way a microphone station can be replaced during
operation for example.
A condition for redundancy is that all cable lengths had been selected in a way that a single-sided powering could cover the power
requirement.
Setup of the microphone stations in a loop
With redundancy i.e. powering the microphone stations on both sides, any cable of the loop can be removed during operation without
interrupting the meeting. All microphone stations are then powered on one side. In this way a microphone station can be replaced during
operation for example.
A condition for redundancy is that all cable lengths had been selected in a way that a single-sided powering could cover the power
requirement.
OK
MCS-D 200 control unit
CA 4146 power supply unit
CA 4146 power supply unit
OK
MCS-D 200 control unit
CA 4146 power supply unit
