Bewator K44 Duo, Technical Manual

Page: 6 / 24

6 K44 Technical manual
Wiring
The numbers refer to the diagram on the right.
1
Electric locking device. Dashed line refers to
locks with failsafe function.
2
Voltage feed in, terminal block nos. 1 and 2.
3
Contact for zero opening. Close terminal
block nos 6 and 7 (or 13).
4
Timing from external time clock. Input 1:
close terminal block nos. 9 and 7 (or 13).
Input 2: close nos. 8 and 7 (or 13).
5
Remote opening button. Close terminal
block pos. 10 and 7 (or 13).
6
Door bell. Output for activating a buzzer or
similar. Always use relay E7 (connect
between nos. 11 and 2(+).
7
Duress. Output for activating e.g. an alarm.
Always use relay E7 (connect between nos.
12 and 2(+).
8
Tamper switch. Normally closed when the
housing is closed.
9
Extra LED. Max. voltage 30V DC.
10
Remove the jumper if background lighting is
not desired.
11
If the voltage feed is below 20 V, set the
jumper to 12 V.