Chapter 6. SETTING: Basic
N6603 Operations User Manual
35
Audio port
: multicast audio port. Assigned automatically or you can set the value of the
port between the values of 1124 and 65534. The default value is 7000.
Time-To-Live
: allows you to set multicast packet time to live. The default value is 15.
NOTE:
TTL
is a mechanism that limits the lifespan of data in a computer or network.
Image size
: allows you to set the following image resolution: 640x480, 320x240, 160
х120.
Sets image resolution for connections via software and is not applied to image at the main page.
Frame rate
: allows you to set streaming rate in frames per second. The following values
are available: 1, 2, 3, 4, 5, 7, 10, 15, 20, 25, and 30 frames per second.
Quality
: allows you to set the video stream quality. The default value is the
[Fixed quality]
.
Auto
: the camera automatically adjusts image quality and frame rate depending on
bandwidth. If the bandwidth decreases, the camera automatically changes image quality
but keeps the frame rate constant.
Fixed quality
: this option allows you to select any of the following quality levels:
[Excellent]
,
[Detailed]
,
[Good]
,
[Standard]
, and
[Medium]
.
NOTE:
See the
Appendix A
for the detailed information about the
[Fixed quality]
.
Fixed bitrate
: allows you to set the fixed bitrate. The following values are available:
2048, 1536, 1280, 1024, 768, 512, 384, 256, 128, 64 kbps.
6.2.2.2. Mobile view
This section is unavailable if the
[RTSP]
is disabled in the
[General]
menu.
IMPORTANT:
The
«Mobile view»
section is unavailable for viewing and managing through a mobile device if the
[RTSP]
is disabled. Therefore, user cannot connect to the camera from a mobile device using 3GPP
stream.
The
Picture 6.17
shows enabled
[RTSP]
.
NOTE:
Go to
SETTING
– Basic – Camera – General
to enable the
[RTSP]
.
Summary of Contents for N6603
Page 1: ...IR LEDs built in...
