14
Safety notes on handling batteries
• Always insert the batteries correctly, taking into account the polarity (+ / -). Keep batteries clean
and dry and away from water. Always select the correct battery type.
• Never short-circuit batteries and battery compartment contacts.
• Never charge, forcibly discharge, heat, disassemble, deform, encapsulate or modify batteries.
• Never weld or solder on batteries.
• Never mix batteries of different manufacturers, capacities (new and used), size and type within
a device.
•
Risk of explosion!
Failure to comply with the points mentioned above can result in personal
injury, overheating, leakage, venting, breakage, explosion or fire.
• If a battery has leaked, put on protective gloves and clean the battery compartment with a dry
cloth.
• If your skin or eyes come into contact with battery fluid, rinse the affected areas with water and
seek medical assistance.
•
Choking hazard!
Keep batteries out of the reach of children. Seek medical attention immedi-
ately if swallowed.
• Never allow children to replace batteries without adult supervision.
• Store batteries away from metal objects in a well-ventilated, dry and cool place.
• Never expose batteries to direct sunlight or rain.
• Remove batteries from the device if it is not going to be used for a long period of time.
• Dispose of discharged batteries immediately and properly. Never dispose of batteries in fire.
• When disposing of batteries, keep batteries with different electrochemical systems separate.
3. INCLUDED IN DELIVERY
Check that the device packaging has not been tampered with and make sure that all contents are present.
Before use, ensure that there is no visible damage to the device or accessories and that all packaging material
has been removed. If you have any doubts, do not use the device and contact your retailer or the specified
Customer Services address.
• 1 diagnostic bathroom scale
• 3 AA 1.5 V batteries
• 1 set of instructions for use
• 1 quick guide
4. DEVICE DESCRIPTION
The corresponding drawings are shown on page 3.
1
Display
7
Measurements
2
Sensor button (reduces setting value)
8
Measurement unit
3
SET sensor button (to confirm)
9
Body data
4
Sensor button
(increases setting value or for user se-
lection when assigning measured values)
10
Measurement data transfer
5
Electrodes
11
Scale connected to
Bluetooth
®
6
Battery compartment
