32
Deleting measur
ed values
• To clear the relevant user memory, you must first select
a user memory.
• Start the retrieval of the average measured values.
A
flashes on the display and the average value of all saved
measured values in this user memory is displayed.
• Press and hold the memory button
M1
or
M2
for 5 se-
conds depending on the user memory you are in.
All the values in the current user memory are
deleted.
Deleting individual measur
ements
• To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button
M1
or
M2
for 5 se-
conds (depending on the user memory you are in).
• The selected value is deleted. The device briefly displays
CL 00
.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP
button.
7.6 Transferring measurements
Transfer via
Bluetooth
®
low energy technology
It is also possible to transfer the measured values saved on the
device to your smartphone using
Bluetooth
®
low energy tech-
nology.
You will need the “beurer HealthManager” app for this. The app
is available free of charge on the Apple App Store and from Goo-
gle Play.
Proceed as follows to transfer values:
If
Bluetooth
®
is activated in the settings menu, the data is trans-
ferred automatically after the measurement. The symbol ap-
pears in the top left of the display (see chapter “7.3 Taking a blood
pressure measurement”).
When connecting for the first time, a randomly generated six-
digit PIN code is displayed on the device, and at the same
time an input field appears on the smartphone in which you
must enter this six-digit PIN code. After successfully entering
the code, the device will be connected to your smartphone
