11
Fire hazard
WARNING
There is a risk of fire if the device is used incorrectly or if it is not used according to these operating
instructions.
For this reason, the massage device must only be operated as follows:
• Never use the device under covers, such as blankets or pillows.
• Never use the device in the vicinity of petrol or other easily flammable materials.
Handling
CAUTION
Switch the device off and disconnect the power supply after every use and before every cleaning.
• Do not insert any objects into the device. Ensure that the moving parts can move freely at all times.
• Never sit or stand on the moving parts of the device with all your weight and do not place
objects on the device.
• Please have an authorised retailer replace a damaged lead.
5. Device description
1. Massage heads (on the underside of the device)
2. Operating element
3. Button with LED indicator
4. +/– buttons
5. Mode button
6. Handles
7. Mains cable
6. Initial use
• Remove the packaging.
• Check the device and cable for damage.
• Route the cable safely so that there is no risk of anyone tripping over it.
7. Usage
The massage must be pleasant and relaxing at all times.
Switch on the massager using the button. The massage is always started on the lowest setting and in the
first massage programme. Three massage intensity settings can be selected using the +/- buttons. The device
offers six different massage programmes that can be selected by pressing the Mode button. Switching the
device off resets the default settings, meaning that the device will start in the first massage programme and
the lowest intensity when it is switched on the next time.
Using the handles, the contact pressure can be increased or decreased and the position of the device can
be adjusted. Press the button again to turn off the device.
Note
• Do not use the massage device for longer than 15 minutes. Otherwise, using the device for longer
can over-stimulate the muscles and cause tension instead of relaxation.
• The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.
• Allow the device to cool for 15 minutes before using it again.
• The massager features protection from overheating with an automatic switch-off fixture if the device
overheats. In such cases, let the device cool down for 30 minutes before recommencing use.
6
2
3
4
5
7
1
Summary of Contents for MG 150
