background image

13

•   Fasten a bottle adapter onto the bottle. There are two adapters available that fit most standard plastic 

bottles:

  1. “PC 1810” thread with a thread diameter of 28 mm and 

  2. “30/25” thread with a thread diameter of 30 mm.

•   Turn the bottle upside down and place it in the top of the air humidifier. Do not compress the plastic 

bottle. The base will fill with water automatically. 

•   Connect the power supply unit connector plug with the connector socket of the air humidifier and 

insert the power supply unit into the socket. Ensure that the cable does not pose a trip hazard. 

•   Turn the control dial clockwise (to the right) to switch on the air humidifier.

Use the device and switch off. 

 IMPORTANT

•   The immediate vicinity of the air humidifier may become damp. Reduce the nebulisation per-

formance or put the device in a more suitable place.

•   Calcareous water can leave white deposits. Use distilled water instead. 

•   If the device should accidentally tip over, water may escape, even if the device is switched off 

and unplugged. 

•   Check the humidity of your ambient air regularly. Intensive continuous operation can cause the 

ambient air to become excessively humid. The relative air humidity should not exceed 60%.

•   By turning the control dial to the right, you can adjust the nebulisation performance between “MIN” 

and “MAX”. 

•  Through operation, the device and the water in the base warm up.

• The air outlet is illuminated in blue when there is enough water.

•   To switch the air humidifier on again, turn the control dial to the left. 

• If there is not enough water, the device will switch OFF (red LED). 

•   Switch off the device when refilling the bottle with water. Change the water in the bottle every day so 

that fresh water is always taken in. 

•   Switch off the device and pull out the plug when you are not using the air humidifier. 

•  Empty any remaining water when the device is not in use.

6. Cleaning, maintenance and storage

Weekly cleaning and disinfection is a requirement for fault-free and hygienic operation.

 WARNING

Switch off the air humidifier each time before cleaning. Pull the plug out of the mains socket.

 IMPORTANT

•  Never submerge the base in water. 

•   Important! Empty the water from the base unit via the side rim. Ensure that no water gets inside 

the device, e.g. via the air outlet or the control dial.

•   Completely clean the bottle and the air humidifier if the device has not been used for over three 

days.

•  Clean the device using only the methods specified.

•  Do not use any solvent-based cleaning products.

•   Use only a mild detergent or vinegar/vinegar-based cleaner to perform cleaning or disinfection 

work.

Summary of Contents for LB 12







Reviews: