Beurer GL44 Instructions For Use Manual Download Page 25

Beurer GL44 mg/dL 

25

Expected results

At room temperature, the measured values from the test using the control solution should be within 

the range printed on the test strip box or on the information sheet included with the test strips in film 

packaging in approx. 95% of all tests.

 Warning 

The specified value range (see test strip box or information sheet with the test strips in film packaging) 

only applies for the control solution. 

This is not a recommended value for your blood glucose level.

If measured values are outside the specified range, check the following possible causes:

Cause

Action

• The first drop of control solution was not dis-

posed of.

•  The tip of the bottle was not cleaned correctly.

•  The bottle was not shaken well enough.

Rectify the cause and repeat the test.

Control solution and/or test strips have passed 

their expiry date or are contaminated.

Repeat the test using a new bottle of control 

solution and/or new test strip from a new box 

or new film packaging.

The control solution, test strips or blood glucose 

monitor are too warm or too cold.

Bring the control solution, test strips and blood 

glucose monitor to room temperature (+20 °C to 

+26 °C) and repeat the test.

The test strips and control solution were kept at 

temperatures and in humidity outside the speci-

fied range.

Repeat the test using new/correctly stored test 

strips and control solution.

Damaged test strips.

For example

• Test strips that were exposed to fresh air for 

too long.

•  The test strip box was not closed completely.

• Film packaging was already opened or dam-

aged.

Repeat the test using a new test strip and/or 

correctly stored test strips from a new box or 

new film packaging.

There is a problem with the blood glucose moni-

tor.

Contact our customer service.

Functional test was incorrectly performed.

Repeat the test and follow the instructions.

 Warning

Do not use the system to measure your blood glucose level

 if you are repeatedly provided with 

measured values outside the specified range when using control solution. Contact our customer 

service.

Summary of Contents for GL44









































Reviews: