background image

24 

Beurer GL42 mg/dL

3

The device then indicates that the subsequent measured value has moved to the memory 

space of the deleted measured value.

7.5  Deleting all stored values

Proceed as described in “4.2 Making and changing basic settings”. After explaining how to set the 

acoustic signal, the section explains how to delete the measured value memory.

8.  s

torinG

maintaininG

 

and

 

disinfectinG

 

the

 

device

Storing

Keep the Beurer GL42 blood glucose monitor in the case supplied after each measurement and do 

not expose it to direct sunlight.

 Note

•  Do not store the device, test strips and control solution in your vehicle, in the bathroom or in a cool-

ing appliance!

•  Retain these instructions for use.

•  Remove the batteries if you do not intend to use the device for a prolonged period of time.

8.1 Cleaning 

Device

Only clean the device when it is switched off.

Clean the surface of the device using a soft, slightly damp cloth (water or a mild cleaning solution). 

Dry the device using a lint-free cloth.

Make sure that moisture does not enter the test strip insertion slot. Do not spray cleaning agent di-

rectly on the device. Do not submerge the device in water or any other fluids and make sure that no 

fluids can get into the device.

Lancing device

Clean the surface of the lancing device using a soft, slightly damp cloth (water, a mild cleaning so-

lution or rubbing alcohol). The lancing device must not be immersed in water or other liquids or be 

cleaned in the dishwasher. Dry the lancing device using a lint-free cloth.

8.2 Disinfection

Device

Please comply with the generally applicable guidelines on disinfection when using the device on dif-

ferent persons. Do not submerge the device in disinfection solutions or any other fluids and make 

sure that no fluids can enter the device.

 Note

The blood glucose monitor is made of precision components. The accuracy of the measurements 

and service life of the device depend on its careful handling:

•  Protect the device from impacts and do not drop it.

Summary of Contents for GL42

































Reviews: