34
For
ehead t
emper
atur
e mode
If the measurement is over 38°C (100.4°F),
appears in the display to indicate that the body tem-
perature is above the normal range.
Fig. 13
The measurement is automatically saved with the date/time and the “fever”
/ “no fever”
classification.
The device is ready to take another measurement when two short beeps sound and the forehead symbol
stops flashing.
The device automatically switches off after approx. 60 seconds or you can press the /
SCAN
button for 5 seconds to
switch it off.
Displaying stored measurements
The device only stores measurements in forehead temperature mode
. The device automatically stores the values from the
last 60 measurements.
When 60 memory spaces are exceeded, the oldest value is deleted.
• The memory can be called up as follows:
• With the thermometer switched on, press and hold the
MODE/MEM
button for 3 seconds.
The most recent measurement is displayed.
• Pressing the
MODE/MEM
button again will display the measured value.
• In the upper line, the time and date are displayed alternately.
Summary of Contents for FT 85
Page 162: ...162 ...
Page 163: ...163 ...
