14
6. Description of the appliance
1
4
2
3
5
6
7
8
9
10
11
7a
7b
7c
12
13
1. Splash protection
2. Function button
3. Function button
4. Fill-level mark
5. Bubble bar
6. Massage roller attachment
7. Interchangeable pedicure attachments
a Callus remover
b Brush
c Massage attachment
8. Infrared light dots
9. Rubber feet (on underside of device)
10. Foot rest with massage nodules
11. Filter cover
12. Removable aroma filter
13. Cord winder (on underside of device)
7. Initial use
• Remove the packaging
• Check the device, power supply and cables for damage.
• Before you plug in the foot spa, fill it up to the fill-level mark (approx 2-3 cm full) with either warm or cold
water. The foot rest should, however, be completely covered with water.
• Route the cable safely so that there is no risk of anyone tripping over it.
• Place the foot spa on a firm and level surface.
8. Use
Make yourself comfortable in a chair and place your feet on the foot rest and apply slight pressure. Never
stand up in the foot spa. The rubber feet on the base of the unit prevent it from sliding.
The device has two massage functions:
• Function 1 : bubble massage, infrared light and water temperature control
• Function 2
: activation of vibration massage
Bubble massage, infrared light and water temperature control
- Press the
- button to switch on the bubble massage (with infrared light and water temperature control).
- Press the
- button to switch the bubble massage (with infrared light and water temperature control)
off again.
These functions are only available together.
