6
The device is only intended for the purpose described in these operating instructions. The manufacturer
cannot be held liable for damage occurring as a result of inappropriate or careless use.
6. Description of appliance
1. Splash protection
2. Rotary switch
3. Water level mark
4. Bubble strip
5. Massage attachment
6. Removable pedicure attachments
a Corn and callous remover
b Brush
c Massage attachment
7. Rubber feet (bottom side)
8. Foot rest with massage nodules
9. Cord winder (bottom of device)
1
2
3
4
5
7
9
6
8
a
b
c
7. Initial use
• Remove the packaging
• Check the device, power supply and cables for damage.
• Before plugging in the footbath fill it with warm water no higher than the level indicator (approx.
4-5 cm). The foot rest should, however, be completely covered with water.
• Ensure that the rotary switch is set to ” ” before the unit is connected to the mains.
• Route the cable safely so that there is no risk of anyone tripping over it.
• Place the foot bath on a firm and level surface.
Make yourself comfortable in a chair and place your feet on the foot rest and apply slight pressure.
Never stand up in the foot bath. The rubber feet on the base of the unit prevent it from sliding.
8. Usage
Set the desired function on the rotary switch:
- Off
- Vibration m infrared light
,
- Heat + bubble massage ,
- Heat + bubble and vibration m infrared light ,
,
,
