Beurer ANTELOPE.TECHWEAR, User Manual

Page: 16 / 24

14
ANTELOPE - part of the Beurer group - BEURER GmbH
9. TROUBLE SHOOTING
Problem POSSIBLE CAUSE SOLUTION
Unpleasant
feeling from
Stimulation
Skin condition is dry
• Spray the ANTELOPE.SPRAY directly on the electrodes.
• Drink enough water before, during and after training.
• If necessary, start your training with a light warm-up without stimulation.
DANGER
If stimulation cannot be felt at an intensity of 25%, SWITCH OFF the BOOSTER and
APPLY ANTELOPE. SPRAY directly to the electrodes in the textile. Then restart the ANTELOPE.APP
and make sure that all intensity levels are set to 0. Once this process is completed, restart using
your ANTELOPE.TECHWEAR according to the instructions in this manual. (see 8.1).
Stimulation intensity is
too high
• Reduce stimulation intensity
• Stop stimulation
Defect electrode Please contact our Customer Care-Team.
Stimulation is
weak / Cannot
feel Stimulation
Skin Condition is dry
Apply ANTELOPE.SPRAY directly onto the electrodes in the textile.
DANGER
If stimulation cannot be felt at an intensity of 25%, SWITCH OFF the BOOSTER and
APPLY ANTELOPE. SPRAY directly to the electrodes in the textile. Then restart the ANTELOPE.APP
and make sure that all intensity levels are set to 0. Once this process is completed, restart using
your ANTELOPE.TECHWEAR according to the instructions in this manual. (see 8.1).
Stimulation Intensity is
too low
Gradually increase stimulation intensity.
DANGER
If stimulation cannot be felt at an intensity of 25%, SWITCH OFF the BOOSTER and
APPLY ANTELOPE. SPRAY directly to the electrodes in the textile. Then restart the ANTELOPE.APP
and make sure that all intensity levels are set to 0. Once this process is completed, restart using
your ANTELOPE.TECHWEAR according to the instructions in this manual. (see 8.1).
Defect electrode Please contact our Customer Care-Team.