background image

29

© 2002 Design, 2014

Doc. No. 12-5372-r01 (4/23/14)

User Manual

UPLOADING SETTINGS & DOWNLOADING DATA

The Mundial 3 is configured with a Data Port located on the back of the left side that enables it to be connected to a PC or MAC 

through a USB port using the BCI (Beuchat Computer Interface) Cable, when viewing the Watch Default Time screen. 

The Settings Upload portion of the BCI or DiverLog program can be used to set/change the Watch Time selections, Set A group 

selections (Alarms), and Set U group selections (Utilities). 

The Download portion of the program can be used to retrieve/copy data (Download it) from the Mundial 3.  

The data includes dive number, surface interval time, maximum depth, elapsed dive time, start date/time, start/end depth, lowest 

temperature underwater, sampling rate, dive profile, and set points. 

The Mundial 3 checks for the presence of an interface device connection to the Data Port once every second while operating in 

Watch mode.  Checks are not made if the Wet Activation contacts are wet. 

When the cable is connected to the Mundial 3, a PC screen appears on the display with a 120 second countdown.

Upon sensing an interface connection with the PC or Mac, the countdown will be terminated and all segments of the LCD will be 

displayed.  This indicates that the PC or Mac and Mundial 3 are connected and prepared for Upload of settings or Download of 

data, which is then initiated using the PC or Mac program.

Operation reverts to the Watch Default Time screen after completion of the Upload or Download operation, or after 2 minutes (the 

120 second countdown reaches 0) if no PC or Mac action was taken.

Prior to attempting to Download data from your Mundial 3 or Upload Settings to it, review the HELP section of the BCI or Diver-

Log program which serves as its User Manual.  Recommended is to print those sections of HELP that you consider appropriate 

for your Interface activities.

PC requirements:

•  IBM

®

, or compatible, PC with USB Port

•  Intel

®

 Pentium 4 or better microprocessor

•  Microsoft

®

 Windows

®

  XP, Vista, 7, or 8

•  Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen area 

of display settings

•  128MB of available RAM

•  64MB of available hard drive storage

•  Mouse

•  CD Rom drive

•  Printer

MAC requirements:

•  Mac with USB Port

•  OSX 10.5 or later

•  Super VGA card or compatible video graphics adaptor (256 color or greater) with a minimum 800 X 600 pixel screen area 

of display settings

•  128MB of available RAM

•  64MB of available hard drive storage

•  Mouse

•  Printer

•  Internet connection to download App from the Apple App Store

Summary of Contents for Mundial 3





































Reviews: