«A»
«A»
«B»
TIME MEASUREMENT
STOP
RESET
«A»
INSTRUCTION MANUAL FOR CHRONOGRAPH JS05 BEUCHAT
ENGLISH
CAUTION : Please carefully read the general using instructions (p.4) before using your watch.
A) DISPLAY
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the date. *If the date is set between the hours of around 9:00 PM
and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
D) USING THE STOPWATCH
This stopwatch is able to measure and display time in 1 second united up to maximum of 29min 59sec.
Stopwatch will stop automatically after running continuously for 30 minutes.
MEASURING TIME WITH THE STOPWATCH
1. Press button "A" to start the stopwatch.
2. The stopwatch can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch minute and second hands return to their
ZERO positions.
STOPWATCH RESET
This procedure should be performed when the stopwatch second hand does not return to the ZERO second
position after the stopwatchhas been reset, and including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press the button "A" to set the stopwatch second hand forward.
Press the button "B" to set the stopwatch second hand back.
* The stopwatch minute hand is synchronized with stopwatch second hand.
* The stopwatch second hand can be advanced rapidly by continuously pressing button "A" or "B".
3. Once the both hands been zeroed, reset the time and return the crown to its normal position.
Normal Crown Position
Stopwatch Minute Hand
Button B
Button A
Hour Hand
Minute Hand
Stopwatch Second Hand
Second Hand
24 Hour Hand
1st Crown Position
2nd Crown Position
