Please read these instructions before use.
Safe Working Load of 75 kg
This accessory is designed for use with the
BetterLiving Community Bed only.
Only approved bed accessories listed in
the BetterLiving Community Bed Parts
List should be used with the bed unless
otherwise specified by Novis Healthcare.
Assemble Product
1
To assemble, attach two sections of the pole by inserting open
ends of each section together.
2
Align the locking button with the corresponding hole and push
in the locking button in as two ends are pushed together
3
An audible click can be heard and the locking button head is
visible through the hole.
To disassemble, depress the locking button while pulling two
sections of the pole away from each other.
BetterLiving Community Bed – Self Help Pole
S E T - U P A N D O P E R A T I O N
Pressure care and patient handling specialists
novis.com.au
/
1300 738 885
JAN
2018 ©
Regular maintenance
Visual inspection for obvious wear and tear of
bar and components.
Replace immediately if you see evidence of
tears, cracks or other general wear.
Care & cleaning
Hand clean using hand spray and wipe
methods only. Novis recommends use of
officially recognized disinfectants and mild
cleaning solutions.
Warranty
Novis Healthcare Pty Ltd warrants this product
for a period of 12 months. Please refer to our
Warranty Statement for full details.
Please contact your authorised dealer or the
manufacturer for a list of available spare parts.
Specifications
CODE
BE7003
MAXIMUM USER WEIGHT
75 kg
PRODUCT WEIGHT
4.5 kg
HEIGHT
1400 mm
CONFORMS TO
ARTG176883
MADE IN VIETNAM
Attach to Bed
Remove or move mattress to locate Self Help Pole bracket
1
To attach the pole to the bed, align the notch at base
section of the pole to groove in the black plastic sleeve
at head end of the bed.
2
With the notch and groove aligned, insert the pole with
a direct downward vertical force. Check the notch is in
contact with the bottom of the groove.
Note, there are two notches on bed frame, depending
on where the pole needs to be positioned for patient
usage. Once in a notch, pole will not ‘rotate’.
Strap may be adjusted to suit patient comfort
To Remove
To remove Self Help Pole, pull vertically upwards out of the the
black plastic sleeve in the bed frame.
Do not pull at an angle or rotate the pole.
Self Help Pole is designed to help patient
position themselves in a bed. It is supplied
unassembled, in two sections with an
adjustable length strap and a plastic handle bar.
