Please read these instructions before use
This accessory is designed for use with
the BetterLiving Community Bed only.
Only approved bed accessories listed in
the BetterLiving Community Bed Parts
List should be used with the bed unless
otherwise specified by Novis Healthcare.
Attach to Bed
1
Ensure Hand screw knobs are loosened,
but not removed.
2
Tilt the top of the Grab Bar forward over
the bed and slide the top of the securing
clip over side of the bed frame
3
Straighten the Grab Bar to allow the
bottom of the clip to slide under the bed
frame
4
Tighten the two Hand Screw Knobs
When attaching a Grab Bar, the gap
between Grab Bar and bed end must
be less than 60 mm or more than
318 mm to comply with entrapment
guidelines.
Ensure a risk assessment is completed
first before attaching any Grab Bar to
the bed.
Remove from Bed
Loosen the two Hand Screw Knobs and tilt
the top of Grab Bar away from the bed and
slide the securing clips off bed frame
Grab rail is designed to assist
patients getting into and
out of bed. The Grab Bar is
supplied with two Hand Screw
Knob for attaching to bed.
BetterLiving Community Bed – Grab Bar
S E T - U P A N D O P E R A T I O N
Pressure care and patient handling specialists
novis.com.au
/
1300 738 885
JAN
2018 ©
Regular maintenance
Visual inspection for obvious wear and tear of
bar and components. Ensure Bar is secure by
tightening Hand Screw Knobs.
Replace immediately if you see evidence of
tears, cracks or other general wear.
Care & cleaning
Hand clean using hand spray and wipe
methods only. Novis recommends use of
officially recognized disinfectants and mild
cleaning solutions.
Warranty
Novis Healthcare Pty Ltd warrants this
product for a period of 12 months. Please refer
to our Warranty Statement for full details.
Please contact your authorised dealer or the
manufacturer for a list of available spare parts.
Specifications
CODE
BE9002
PRODUCT WEIGHT
2.0 kg
DIMENSIONS
W
265 x
H
630 x
D
55 mm
CONFORMS TO
ARTG176883
MADE IN VIETNAM
0 - 60 mm
or
318+ mm
