6
Installing the Injection Fitting
Installing the Injection Fitting
Disconnect the main hose from
the reservoir of your CPAP
machine.
Position the injection
fitting onto the port of your
reservoir, allowing the smaller
hose to enter into and rest on
or near the bottom of the reser-
voir.
It may be necessary to trim
off some of this smaller hose
to achieve the best fit.
If you
experience difficulty inserting
the small hose into the reservoir,
please visit
www.youtube.com/
betterrestsolutions
to see how
this can be done with a number
of different style humidifiers.
If you are currently not using a
humidifier, remove this short
length of hose by pulling it
straight off, then attach the
fitting directly to the port on
your CPAP machine.
(see next
page)
3. Installing the Injection Fitting