Rear Panel:
NOTE
NOTE
NOTE
NOTE
01
733.78
MHz
CH
02
738.59
MHz
CH
RF AF
RF AF
2
3
1
5
4
6
RECEIVER SPECIFICATION
Front Panel:
1. Power
2. LCD screen
3. Volume control
4. Volume control
B. MODEL SETUP SPECIFICATION:
1. Install two antennas to the antenna socket A & B of the rear panel, the
direction between them should be adjusted about 90°.
Do not install in too firmly or it may damage your system’s
antenna output.
2. Insert the DC power to the rear panel of your system.
Only use a DC 13~15v DC power, if you use any other power
voltage other than DC 13~15v you may damage the system. Your
warranty may be terminated if you damage it like this.
3. Turn on the power button that the LCD screen will be on.
4. Adjust the receiver’s status to your liking.
5. Turn off power the LCD screen will automatically shut off.
C. LCD PANEL OPERATION:
After turn on the power, LCD is light up as screen:
1. RF (radio frequency) Indicator
2. AF (audio frequency) Indicator
3. Current Channel Display
Make sure your receiver’s
channel/frequency matches the one
in your handheld transmitter’s channel/frequency.
4. Current Channel Display
Make sure your receiver’s channel/frequency matches the one in
your handheld transmitter’s channel/frequency.
5. RF (radio frequency) Indicator
6. AF (audio frequency) Indicator
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the
receiver may lead to electric shock,
fire, or damage to the receiver and
will void your warranty.
DC-POWER
DC 13~18V
350mA
1/4 MIX ED
A & B
AUDIO OUTPUT
BALANCED-A
BALANCED-B
ANTENNA-B
BNC-50
Ω
ANTENNA-A
BNC-50
Ω
MODEL NO.
VM-52U
CALIFORNIA, UNITED STATES OF AMERICA
Comments? E-mail: [email protected]
www.BetterMusicBuilder.com
ENGINEERED AND DESIGN IN U.S.A.
SERIAL NO.
0
3 6 1 2 0 0 6 0 9 0 8 - 2 1
3
Better Music Builder
®
TM
3
5
6
9
7
8
10
Rear Panel:
5. Antenna socket B
6. Unbalanced output
7. Balanced-B output
8. Balanced-A output
9. Power jack
10. Antenna socket A
