11
3. PLACING THE SPEAKER ON THE FLOOR TO
MONITOR SINGING
This speaker can be placed on the floor to perform the vocal
monitoring function for live singing experience. It can also be
used for business conference, coffee shop and church, etc.
When you use this speaker for the center or “monitor” the
manufacturers has 4 plastic washers screws on the back of the
speakers to prevent extreme shaking from recoil. You may use the
speaker bracket to tightly install to the floor/ground, this will hold
the speaker in place even with extremely loud music.
NOTE
1. PLACING THE SPEAKER ON THE FLOOR TO
MONITOR SINGING
This speaker can be placed on the floor to perform the vocal
monitoring function for live singing experience. It can also be
used for business conference, coffee shop and church, etc.
When you use this speaker for the center or “monitor” the
manufacturers has 4 plastic washers screws on the back of the
speakers to prevent extreme shaking from recoil. You may use the
speaker bracket to tightly install to the floor/ground, this will hold
the speaker in place even with extremely loud music.
NOTE
4. PLACING THE SPEAKERS ON THE PORTABLE
STAND
The speakers can be mounted on to the optional portable
stand, (see figure below). Make sure that the mounting system
(hardware, stand, etc.) is capable of supporting four times the
weight (approximately 25 lbs per speaker) of the speakers.
Part Number: AMS001B (Optional).
Stand is not included
If you would like to insert a
speaker stand please remove three
allen screws (screw size 8mm) which
are in a triangular corner. Then insert
the speaker top holder carefully to
avoid scraping.
NOTE
Top holder is included
in package.
Floor
RUBBER FEET
The speaker
mounting pole as
indicated in the diagram
is not included with any
of our speaker models.
You may order it directly
from our authorized
dealers near you.
NOTE
INSTALLATION SETUP for MODEL DFS-910
DFS-910
DFS-115 SUB
SPEAKER
MOUNTING
POLE
(Adjustable)
38 inch
96.5 cm
D
F
S
-9
10
2. PLACING THE SPEAKERS
ON THE PORTABLE STAND
The speakers can be mounted on to
the optional portable stand, (see
figure below). Make sure that the
mounting system (hardware, stand,
etc.) is capable of supporting four
times the weight (approximately 25
lbs per speaker) of the speakers.
Part Number: AMS001B (Optional).
3. PLACING THE SPEAKERS
ON THE SPEAKER
MOUNTING POLE
(Adjustable)
Part Number: AM91 (Optional)
Floor
RUBBER FEET
Stand is not included
Summary of Contents for Dynamic fusion DFS-908
Page 19: ...19 ...
