7
SPEAKER CONNECTION METHODS AND INFORMATION
Connection
CONNECTOR INFORMATION
Either banana plug or wire insert type can be used to
connect the unit to speakers. Be sure to connect red (+) to red
(+) and black (–) to black (–). Otherwise, the sound output
would be 180° out of phase and distorted.
Follow these steps to insert the wire directly into the speaker
terminal.
1. Strip off the vinyl covering and twist the tip of the
wire core.
2. Loosen the knob and insert the wire core into the
terminal hole.
3. Tighten the knob to fix the wire core in place.
Do not allow the wire core to protrude or touch other
terminals or wires, otherwise, damage may occur.
METHODS OF SPEAKER CONNECTION
1. Wire Insert Type
(Poor Connection)
SPEAK
ERS
NO GOOD
2. Double Banana Plug Type
(Standard Connection)
SPEAK
ERS
3/4”
19 mm
3. Single Banana Plug Type
(Superior Connection)
SPEAK
ERS
1/4” to 1/4” Cable
1
SHIELD
COLD
HOT
2
3
Balanced XLR Connectors
XLR
TRS
Hot (+)
Pin 2
Tip
Cold (-)
Pin 3
Ring
Shield (Ground)
Pin 1
Shield
XLR to RCA Cable
XLR to 1/4” Cable
GOOD
X
√
