Page 2
Step 1: CAREFULLY remove tiles from table rim (A) and set aside until Step 4. Remove all protective materials. Identify all
parts packed in carton against the parts list.
Step 2: Attach the table leg (B) to the leg connector
bracket (D) using bolt (F) and washer (G). Guide bolt
and washer through the leg connector bracket to the
table leg. Hand tighten 3 – 4 revolutions only. Repeat
on the other 3 legs. Attach table top support (C) to the
leg connector bracket using bolt (F) and washer (G).
Guide bolt and washer through the bracket to the
support. Also hand tighten 3 – 4 revolutions only.
Repeat on the other side.
