5
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Insert four Wood Dowels (4) into the inner holes of the Bottom Panel (C). Tap in with a rubber mallet, if
necessary. Make sure that you use a small amount of glue with both ends of all dowels.
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
3.
Glue two Wood Dowels (4) into the inner holes of each Top Stretcher (D).
④
x 8
4
4
4
4
4
D
x 2
C
4
