17
Assembly Instructions
16.
Ask for assistance to stand the unit upright.
17.
Cover the countersunk holes by inserting the provided Plastic Caps (8 and 9). Gently tap the Plastic
Caps with a rubber mallet to ensure they are fully seated.
NOTE: You must install the Strip Stopper to prevent the TV from tipping when placing your flat panel
television directly on the console.
18.
Remove the paper backing from the Stop Rail (K), then properly align the Stop Rail with the top edge of
the stopper template on the Top Panel (A). Press down on the Stop Rail to help adhesion.
19.
Carefully remove the stopper template from the Top Panel (A).
9
K
8
Large Plastic Cap
(12 used in this step)
⑧
Small Plastic Cap
(16 used in this step)
⑨
