4
Assembly Instructions
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,
go back and fully tighten all bolts. This will make the assembly easier.
1.
Unpack the unit and confirm that you have all the hardware and required parts.
2.
Place the Top Frame (A) upside down on a scratch free surface, as shown.
3.
Align and attach one Metal Side Frame (B) to the Desk Top (A) by using four 1-1/8" Bolts (2) with
Lock Washers (3) and Flat Washers (4) from inside of the Desk Top (A) through the drilled holes on the
apron side rail and screw into the threaded sockets on the Metal Side Frame. Fasten the Metal Side
Frame (B) to the Desk Top (A) by inserting one 7/8” Bolt (1) with the Washers (3 and 4) through the
drilled hole on the top plate and screw into place. As shown.
4.
Repeat last step with the other Metal Side Frame (B).
A
B
B
B
A
1
4
3
2
4
3
A
B
Lock Washer
(10 used in this step)
③
Flat Washer
(10 used in this step)
④
1-1/8” Bolt
(8 used in this step)
②
7/8” Bolt
(2 used in this step)
①
