5
Assembly Instructions
3.
Remove the plastic caps from the hanger bolts of the Legs (C).
4.
Attach 4 Legs (C) to the apron corners of Table Top (A) by inserting the hanger bolts pre-attached on Leg
through the pre-drilled holes on corner block, and fit Flat Washer (3), Lock Washer (2) and Hex Nut (1)
onto each hanger bolt, then securely tighten the Hex Nuts with the provided open wrench.
①
x 8
③
x 8
②
x 8
DO NOT fully-tighten the nuts or bolts initially until all the nuts or bolts are
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
A
C
C
C
C
1
2
3
A
C
C
