4
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts.
2.
Position the Table Top (A) upside down on a level and protected surface.
3.
Attach the four Aprons (B and C) to the Table Top (A) by inserting twelve 5/8" Bolts (1) with Lock
Washers (2) and Flat Washers (3) through the metal tabs and screw into place.
DO NOT
fully tighten the
bolts.
DO NOT fully tighten the bolts initially until all the bolts are ready to
assemble. To avoid causing damages to the thread, DO NOT over-tighten the bolts.
1
2
3
C
A
A
B
B
C
C
B
1/4" x 5/8" Bolt
(12 used in this step)
①
Lock Washer
(12 used in this step)
②
Flat Washer
(12 used in this step)
③
