4
3. Fit the rubber seal to the end of the threaded connector into the rear of the shower
head. Once fully fitted, re-fit the screw and tighten using the Allen key provided,
ensuring that the head is level. Silicone can be applied between the shower and the
wall to prevent water from passing behind the head.
Please note:
Once installation is completed, turn on the water supply and check for any
leaks
Operation
To change the water flow from the shower head, place your finger over the sensor on the
underside of the shower head (indicated by a green light) for 2-3 seconds, to change back
,carry out the same process.