4
INSTALLATION
At the back of the mirror, there are 2 hanging hooks spaced
across the top.
To hang the mirror, two holes are required in the
wall. Before drilling, ensure that no wires or pipes are behind the
wall. If unsure, seek professional advice.
1.
Measure the distance between the centre of the two hanging points.
2.
Make a note of the distance and mark their position on the wall. Use a spirit level
to ensure that the marks are level.
3.
Drill the 2 holes into the wall at the position marked using a suitable drill bit.
4.
Insert the wall plugs into the holes.
5.
Insert the screws into the wall plugs, ensuring their heads are protruding by
approximately 3mm.
6.
Check to ensure the screws line up correctly and the mirror can be safely hung
from them.
7.
Carefully lower the mirror onto the 2 screws, ensuring that is secure and will not
slide.
CLEANING AND MAINTENANCE
Never use products containing bleach or abrasive cleaners, as these will have a
detrimental effect on the appearance and lifespan of the product.
Use a clean micro fiber cloth to clean the mirror.
