User manual
BETSO WTCS-1
6.
Turning ON/OFF
Turning device ON
long pressing
POWER
button
Turning device OFF
long pressing
POWER
button
After turning ON the WTCS-1, there will be displayed BETSO logo and after
that, WTCS-1 will start to operate according to previous setting in the menu.
If jamming is enabled and there is an external TC source connected to WTCS-1,
it starts to jam immediately.
7.
Menu control
Enter the menu
long press of
SET
button
Exit the menu
long press of
SET
button in main menu
Enter the submenu
short press of
SET
button
Exit the submenu
long press of
SET
button
Move up
short press of
UP
button
Move down
short press of
DOWN
button
Enter the setting
short press of
SET
button
Change setting
short press of
UP
/
DOWN
button
Confirm the setting
short or long press of
SET
button
After exiting of the menu, all critical changes will be made upon question
confirmation, other changes are set immediately.
Setting will be saved during regular turning off process, unpredicted battery
removal will result in unsaved menu setting. Low battery power off will save
setting correctly.
7
©
Copyright BETSO ELECTRONICS s.r.o.
