1.
Press the Rotary Button (Mode) once to access Sound Therapy mode. Use the
rotary switch to cycle to each mode:
Ocean
:
Authentic, digitally recorded ocean sounds
White Noise
:
White noise and Delta tone melodies layered together
help to quite a noisy environment and an over-active
mind
Sea Waves:
Authentic, digitally recorded sea waves sounds
Zen:
A tonal melody in frequencies that mimic the Delta
brainwaves of a mind in meditation or healing sleep
Nature
:
Listening to a relaxed nature sounds, which helps to
negate distracting environmental noises
Sound therapy volume can be adjusted by the button controls.
2.
Use the rotary switch to adjust speaker volume.
SETTING AND USING THE SLEEP
TIMERS
SETTING THE SLEEP TIMER FROM THE UNIT
Sleep mode lets you sleep to built-in lights, sounds to your Bluetooth device. There are
three sleep timer modes, 15mins / 30mins / 60mins, each set the same way. Directions
below show the sleep timer button. Press the sleep button to go straight into sleep time
setting with current settings. Otherwise follow steps below.
Unit must be turn on for sleep mode.
1.
Press the
Timer Button once.
The current timer light on the side of the
product turns on.
2.
Press the
Timer Button
once again to switch to the next timer mode.
3.
Continue in this manner until ”60” timer light turns on. Press the
Timer Button
as
needed to cycle to the desired sleep duration: 15, 30, 60 minutes.
Press the
Timer Button
during sleep to set sleep to switch sleep timer. Press again to
go to next sleep duration. After setting the sleep timer, your settings will be saved for
later use.
