BTS-37 BK8000L_AUX_20150306 V1.0_r0
5
C.
About the rechargeable Battery & Charging
This Bluetooth Speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it charge
for about
3 ~ 4 hours
or until the
“Charge LED (12)”
light to off from On
which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn’t used for
a while, the battery might need to be recharged. Charge the battery at
least once every month.
To recharge the built-in battery:
Connect the Bluetooth Speaker’s “
Micro USB socket (3)”
with the
Computer’s USB port through USB cable.
The
“Charge LED (12)”
light will turn On in red, the battery is in
charging.
The
“Charge LED (12)”
light will turn Off when the rechargeable
battery is fully charged.
Disconnect the USB cable when it is done.
D.
Power ON and Pairing
1.
Slide the
“Power Switch (2)”
button to ON position to turn On the
device, a series of tones will sound and the
“Bluetooth LED (10)”
will
light and then fast blinking blue in seconds.
2.
Then activate the Bluetooth function in your mobile device (such as
Mobile Phone or Personal Computer), the device will enter to
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
3.
Your mobile device should show
“BTS37”
in list, and then select it for
pairing. Waiting for some seconds and you will see connected
message as shown on your mobile device. (For some Bluetooth
devices, you may need to input
“0000”
as pairing password)
4.
If pairing is successful, a series of tones will sound and the
“Bluetooth
LED (10)”
light will switch to slow blinking from fast.
5.
Now, you can start to music play from the mobile device by it music
player program.
6.
Slide the
“Power Switch (2)”
button to OFF position to turn Off the
device when it is not in use.
Note:
for saving battery energy, the Bluetooth Speaker will turn to sleep
mode when no device is in paired in 8 minutes. To restart the device, slide
the
“
Power Switch (2)”
button to OFF and then to ON position.
E.
Disconnect from paired device
1.
To disconnect with paired device, for better result turn Off the
Bluetooth Speaker directly.
