BTS-09 User Manual V1.0_NF-BS621_130930_r0
4
Charging The Bluetooth Speaker
1.
Open the rubber seal cover (8).
2.
Connect the Bluetooth Speaker’s Mini USB socket (11) with the Computer’s USB port
through USB cable.
3.
The Charging LED (2) will turn ON in red light; the rechargeable battery is in
charging.
4.
The Charging LED (2) red light will turn OFF when the rechargeable battery is fully
charged.
5.
Disconnect the USB cable, and close the Rubber Seal Cover (12) when it is done.
Bluetooth Speaker Pairing / Reconnecting
1.
Press and hold the
button (1) for 2 - 3 seconds, a tone sound then message
“It
is paring wait for device connecting”
will announce from speaker and the
Mode LED (2) will blinking in blue, the device is turned ON and goes into reconnect
/ searching mode for pair depend on status;
2.
The Mode LED (2) blinking in blue every 2 seconds once if it is in reconnect mode.
Or, the Mode LED (2) fast blinking in blue half seconds once, in search mode if for
first time pairing. If not, press and hold
button for 2 – 3 seconds to switch into
searching mode for new device’s paring.
3.
Now, turn ON the Bluetooth function on your mobile phone, search for device
name
“BTS09”
and select it to pair.
4.
If pairing is successful, a tone sound then message
“Paired”
will announce from
speaker and the Mode LED (2) light will switch to slow blink in blue (every 4
seconds once).
5.
The Bluetooth Speaker will be reconnecting automatically if your mobile phone has
been paired. (Depend on the of mobile phone’s type and configuration, manual
reconnection may require on some devices)
6.
Press and hold the
button (1) for 2 - 3 seconds, a tone sound will announce and
Bluetooth speaker turned to OFF when you not use it.
Note:
During in searching / pairing mode, the Bluetooth Speaker will power OFF
automatically in 8 minutes if no device is connected and idle.
Bluetooth Speaker Control Function
1.
In playing music, press
button (3) to pause music, press it once again to play.
2.
Pressing or press and hold the
button (7) to increases the volume level.
3.
Pressing or press and hold the
button (4) to decreases the volume level.
4.
When maximum or minimum volume is reached, a tone sound will be heard.
5.
Press the
button (7) to play next music file.
6.
Press the
button (4) to play previous music file.
Hand Free Function
1.
When there is an incoming call;
2.
The ringing sound will up and the playing music will pause automatically.