A
DETAIL A
SCALE 1 : 6
TILT MACHINE BACK AND
REMOVE FRONT COVER
USE 3/4" OPEN END
WRENCH TO SECURE
SHAFT AND SPIN
PAD DRIVER OFF
SHAFT BY HAND
PAD CHANGING INSTRUCTIONS
DO
NOT
TILT MACHINE ON ITS SIDE
CENTER THE PAD ON PAD HOLDER
AND TIGHTEN CENTER LOCK
USE THE HI-SHINE LIGHT BURNISH PAD
21" IS PART NUMBER F084621 (5 PER CASE)
27" IS PART NUMBER F084627 (5 PER CASE)
SPIN PAD DRIVER BACK ONTO SHAFT
AND REPLACE COVER
NOTE: PAD CAN BE CHANGED ON THE MACHINE WITHOUT REMOVING PAD DRIVER,
BUT YOU MUST GET ON THE FLOOR AND BE SURE THAT PAD IS CENTERED ON PAD DRIVER.
