General Safety Information
When using this product, basic precautions should always be followed, read all
instructions before using.
! WARNING! To reduce risk of injury:
x
Do not allow to be used as a toy. Close attention is necessary when used
by or near children.
x
Use only as described in this manual. Use only manufacturer’s
recommended attachments.
x
Wear proper anti-slip shoes when operating this machine.
x
Always use safety gloves and glasses when mixing chemicals.
x
Do not use with if damaged. If machine is not working as it should return it
to a service center for inspection.
x
Do not put any foreign object into openings. Do not use with any opening
blocked; keep free of dust, lint, hair, & anything that may reduce flow.
x
Turn off valve for storage.
x
Do not use in or around flammable or combustible liquids such as gasoline
or use in areas where they may be present.
Preparation and Operation
Attach front mount solution bracket to base of machine.
Attach stainless steel solution spreader bar to front mount bracket. Make sure
spreader broom is positioned on front of machine.Tighten plastic knobs hand
tight only.
Insert plastic solution hose coupler into plastic solution spreader bar in side
stainless steel solution spreader.
Be sure solution valve is in the off position.
Fill tank with water and appropriate chemical for job.
You are now ready to begin your cleaning task.
Open solution valve to appropriate flow rate.
Pull the machine backwards at a pace that allows solution to spread evenly.
After Use
Drain all left over solution from tank.
