BETCO Genie B, Operator And Parts Manual

Page: 9 / 40

9
8. BATTERY DISCHARGE INDICATOR
The battery indicator is digital with 4 fixed positions and a flashing signal. The
numbers that appear on the display represent the approximate charge level.
4 = Maximum Charge
3 = 3/4 Charge
2 = 1/2 Charge
1 = 1/4 Charge
0 = Discharged Batteries (Flashing)
WARNING: A few seconds after the appearance of the flashing "0",
the brush motor will automatically turn off. With the remaining
charge, it is possible to continue using the vacuum motor to finish
drying the surface before recharging.
9. INSTRUMENT PANEL COMPONENTS
The instrument panel components are identified as follows:
1. Main Power / Brush Motor Switch
2. Vacuum Motor Switch
3. Solution Valve Switch
4. Digital Battery Discharge Indicator
10. POSITIONING THE HANDLEBARS
For packaging purposes, the handlebars are positioned in the down location and
must be put into working position.
1. Squeeze the lever on the right side of the machine to release the handle lock.
2. Lift the handle upwards while maintaining pressure on the lever.
3. Attach the recovery tank to the handle tube using the two hooks on the tank.
4. Attach the vacuum hoses to the lid on the recovery tank.
MACHINE PREPARATION