![BETAFPV Cetus FPV Kit Manual Download Page 9](http://html1.mh-extra.com/html/betafpv/cetus-fpv-kit/cetus-fpv-kit_manual_2742845009.webp)
The flight mode is dis
played in the lower right corner of the flight screen, corresponding to the
flight mode of quadcopter. Pilot can choose different flight modes according to different flight
environments and their flight control skills. chg
1. Normal Mode: When the quadcopter ascends, center the two joysticks at the same
time, and the quadcopter will maintain at a fixed point in a horizontal attitude. The position
of the direction joystick controls the tilt direction and tilt angle of the quadcopter. The
quadcopter has an auxiliary flight function that can assist in adjusting the altitude and
horizontal position, which makes it easier for pilot to control. N MODE is displayed in the
OSD. chg
2. Sport Mode: When the quadcopter ascends, pilot needs to operate the throttle
joystick to control and adjust the altitude of the quadcopter. The position of the direction
joystick controls the tilt direction and tilt angle of the quadcopter. When the direction joystick
is moved back to the center, the quadcopter will return to a horizontal attitude. The
quadcopter has no auxiliary flight function, which makes the operation relativ
ely difficult for
pilot. S MODE is displayed in the OSD.
3. Manual Mode: W
hen the quadcopter ascends, pilot needs to operate the throttle
joystick to control and adjust the flight altitude. Position of the direction joystick controls the
roll direction and the roll speed of the quadcopter. The quadcopter will maintain its current
attitude when the direction joystick is moved to the center. The quadcopter has no auxiliary
flight function, and the flight attitude and altitude are completely dependent on the pilot to
control the quadcopter by the remote controlradio transmitter, which makes the operation
very difficult for pilot. M MODE is displayed in the OSD.
The flight mode is selected by a switch on the remote control radio transmitter. For more details,
please refer to the chapter “Remote Control Radio Transmitter-Switch Functions”.
Caution: Please keep the flight altitude within 0.3-3m when it is in Normal Mode. This can keep
the quadcopter fly stably. The outdoor flying height of the quadcopter should not exceed 3m as
far as possible.
Battery Charging
Each battery provides 4-5 minutes of smooth flight. When LO
W VOL is displayed in the OSD
flight interface and the status LED on the quadcopter changes to flashing red, which indicates
that the battery is too low and needs to be charged. Charging steps are as follows:
l Plug the charger into the Type-C port through
USB cable
;
l Connect one or two batteries to the port on the right of the charger and the charger’s
LED turns solid red when charging;