HoriZen
®
HoriZen Prime
10
Assembly sequence
First fit the spacer (use only at the bottom)
into the post groove and then insert the
start profile (1) and centre it.
Install the first panel (2), the tooth facing
up, centre it.
Carry on with subsequent panels.
Fix the last panel with a screw (3)
Place the end profile (4) and glue.
Install and glue post caps (5).
TIP:
When slotting the panels in, lightly
press the groove in the post with a wooden
block. For ALU profiles, a lubricant can
also be applied.
Position end
profile
Panels can be shortened
on site.
Tip:
Desired axis size
minus 17 mm for WPC
Panel width: 1783 mm
Intermediate dimension: 1740 mm
Axis size: 1810 mm
30-50 mm
≥
3 cm
1. Start profile
Use a piece of
the end profile as
a spacer. Glue or
screw it in place.
3.8 x 45
ø2.5
2. Panel element
tooth
3. Fixing
ø2.5
To secure panels in
strong winds, fix the last
(top) panel with a screw
on both sides.
3.5 x 45
4. The end profile fits between
the posts, not in the groove. See
image right.
5. Install and glue post caps
